Large Bearing
Slewing Bearing
Stainless steel bearing
Housing
Deep groove ball bearing
Angular contact ball bearing
Self-aligning ball bearing
Spherical roller bearing
Tapered roller bearing
Cylindrical roller bearing
Thrust bearing
Needle bearing
Sealing ring
Linear Guide
 
Gate valve
Ball valve
Butterfly valve
Check valve
Exhaust valve
 
 
Address:
11 Building 1199 Lane Minsheng Road Pudong District Shanghai
Tel: 86-15312215389
Email: info@bohembearing.com
 
 
Products  
 

Check valve

 

 

A check valve allows fluid to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave. There are various types of check valves used in a wide variety of applications. Check valves work automatically and most are not controlled by a person or any external control; accordingly, most do not have any valve handle or stem.

 

Design Features


Seat

For carbon steel check valves, the seat material is usually forged steel. The sealing surface of the seats is spray welded with hard alloy specified by the customer. Renewable threaded seats are used for NPS≤10 check valves, and welded-on seats are optional. Welded-on seats are used for NPS≥12 carbon steel gate valves. For stainless steel check valves, an integral seat is usually utilized, i.e. by welding hard alloy directly within body cavity. Threaded-in or welded-on seats are also optional for stainless steel check valves, if required.

 

Body-Cover Gasket
 Stainless steel + flexible graphite wounded gaskets are used for Class 150 and Class 300 check valves; stainless steel flexible graphite wounded gaskets are used for Class 600 check valves, a ring type joint gasket is used for Class 900 check valves; a pressure seal design is used for Class 1500 and Class 2500 check valves

 

Body-Cover Connection

The body and bonnet of Class150 to Class 900 check valves are usually connected by with studs and nuts. And the body and bonnet of Class 1500 to Class 2500 check valves usually utilize a pressure seal design.


 
 
 
SD3144
W208PPB5
SBPP207
53238U
BRH35AL
NK75/35
SL18-5012
LM67048/LM67010
L44640/L44610
6306-2RS Bearing
6224LLU Bearing
682/672 Bearing
23132BK Bearing
24136CE4 Bearing
150KBE02 Bearing
6944 Bearing
29268E Bearing
7205A5TYNP5 Bearing
51120 Bearing
6018N Bearing
 

Home | About Us | Products | Factory | Conact US
Shanghai Bohem Bearing Machinery Co., Ltd. © 2016 www.bohembearing.com All Rights Reserved
Tel:86-15312215389 E-mail:info@bohembearing.com